ABOUT
Parts Processing
Material Selection
Assembling
Waterproof
Thermal Shift
light source
Coating
Surface characteristics
Drop simulation
Temperature simulation
……
Category | Tolerance item | Specification | Production site |
---|---|---|---|
Plastic lens molding processing accuracy (Outer diameter≤10mm) |
Lens surface requirements | PV≤±0.5um;AS≤±0.2um | Self made |
Lens center thickness requirements |
CT≤±2um |
||
Lens eccentricity requirements | DC≤1.5um | ||
Tolerance of lens outer diameter |
D ≤±3um |
||
Plastic lens molding processing accuracy |
Lens surface requirements | PV≤±0.5um;AS≤±0.2um |
Self made |
Lens center thickness requirements |
CT≤±2um |
||
Lens eccentricity requirements | DC≤1.5um | ||
Tolerance of lens outer diameter |
D ≤±3um |
||
Spherical glass forming accuracy (Outer diameter≤20mm) |
Lens surface requirements | PV≤±0.5um;AS≤±0.2um | Self made |
Lens center thickness requirements |
CT≤±2um |
||
Lens eccentricity requirements | DC≤1.5um | ||
Tolerance of lens outer diameter |
D ≤±3um |
||
Spherical glass forming accuracy |
Lens surface requirements | PV≤±0.5um;AS≤±0.2um |
Self made |
Spherical glass forming accuracy (Outer diameter≤20mm) |
Lens surface requirements |
PV≤±0.5um;AS≤±0.2um |
Self made |
Spherical glass forming accuracy |
Lens surface requirements | PV≤±0.5um;AS≤±0.2um |
Self made |
Lens surface requirements |
PV≤±0.5um;AS≤±0.2um |
Self made | |
Lens surface requirements | PV≤±0.5um;AS≤±0.2um |
Self made |
Software theory analysis
Use ASAP and Lighttools theory to analyze Ghost & Flare generation path
Theoretical analysis of Ghost&Flare generation path, and based on the energy intensity, adjust the reflectivity of the lens coating to reduce the poor imaging effect
Routing
Advantages: Solve the problem of high reflectivity at the edge of large curvature lens (uneven film); good adhesion of the coating, and the film is not easy to fall off; compounds/alloys/non-metals can be filmed
General reflective IR is easy to reflect the IR light and cause the reflection between the lenses or the sensor to cause ghosting or flare.
Vibration test
Temperature cycle test
Salt mist, cyclic
Gravel impact test
Orientation drop test
Packing drop test